• Welcome
  • About Us
  • Club Calendar
  • Bylaws & Minutes
    • Shop Rules and Procedures
  • Safety
  • Projects
  • Links
    • Links For Learning
    • Links For Woodworkers
  • Monitors
    • Monitor Signup
    • Monitor Scheduling System Tutorial
  • Training
  • Current News
  • Equipment
  Sun City Oro Valley Woodworking Club

Laguna LT14 x 14 SUV Band Saw


This machine is used primarily for resawing and normally has a 3/4" or 1" blade installed. Here are some rules and important things to know about using this machine:
  • If you want to saw logs or abrasive exotic woods such as teak, you must use your own blade.
  • When cutting logs, the log must have a true, flat surface to rest on the bandsaw's table or be securely attached to a sled or fixture to ensure stability. The log, sled or fixture must be fully supported by the table at the blade.  Failure to do this may result in operator injury and/or damage to the machine.
  • Do not cut metal with this machine.
  • Do not attempt to change blades unless you have been checked out in the process. The ceramic blade guides are excellent, but can be easily damaged if the installation procedure is done incorrectly. See videos below.
  • Do not back out of a cut while the machine is running. Shut the saw off before backing out of a cut.
  • If you break a club-owned blade by attempting to back out while the saw is running, or if you dull or damage a blade by cutting logs, etc., you may be required to purchase a new blade. The cost is about $40.00.
  • Be sure to read and understand the Owner's/Safety Manual and get checked out on this machine before operating it the first time.
Picture

Click on the button to download or view Owner's/Safety Manmual
Owner's/Safety Manual

How-To Videos From The Manufacturer


Bandsaw Safety

Installing The Blade

Adjusting Guides

How To Replace Ceramic Guides
Welcome
Club
Woodshop
News
Links
C
Proudly powered by Weebly